| Main > Main Forum |
| 3/4 vs 5/8 |
| (1/2) > >> |
| Shieldwolf:
I'm using Scott's Unicade support frame as an example for my cabinet. I live in L.A. and in an apartment. So A. I know I will have to move and want the thing sturdy. and B. We have Earthquakes and I want the thing sturdy. With that being said should I go with 5/8 pr 3/4 mdf. I personally think the 5/8 will be fine, since I have a support structure. I am worried about the coin door and my cp. I was thinking I should make the cp out of 3/4 and hope that 5/8 is enough to support the coin door on the front. Any suggestions? Is the support frame over kill? Thanks in advance, Shieldwolf |
| Sasquatch!:
The only gotcha I can think of is that it might be more of a pain in the arse to find t-molding (and the proper slot cutter) for 5/8 than it would for 3/4. For my next CP, I plan on using 5/8 with 1/8 plexi to give it a total depth of 3/4. |
| meta87:
I used 5/8 on my whole cabinet and believe me, it's plenty strong even without that support structure. You definetly don't have to worry about the coin door or control panel. I tried to actually rip out the coin door and I'm a big guy. Didn't even bend. I get my t-molding from http://www.stievenart.com/ Really fast shipping and they have 5/8. |
| paigeoliver:
Also, you might want to work with plywood instead. Plywood cabinets last a lot longer and are much harder to damage. |
| night:
i dont know anything about that frame, but they are solid as hell. 3/4 is serious overkill. i am also in an apartment and i designed my cab based on lightweight for moving and easy to get apart. by i can promise you, it isnt going anywhere. |
| Navigation |
| Message Index |
| Next page |