Main > Project Announcements
Semi Slim Cabinet Scratch Build (COMPLETE!) with LCD Widescreen, LOTS of pics!
topher0002:
just more painting.
topher0002:
Ok, Im going to back track here a bit, I missed some pics that could be useful so I will throw them in here.
The red cup used below was just to draw lines around the corners of the control panel and cut them. Some people like to use a compass but Zog like Red cup, compass nowhere to be found. :dunno
Other pics are just after drilling holes with the paddle bit (1 1/8 in)
topher0002:
Another problem I ran into that I will mention, is that when I rounded the corners of the control panel on top obviously the box corners are now visible and ugly. I basically choped them off with a jig and covered them with sheet metal, looks kinda cool really, I will show pics of this later but thought I would mention it.
Below is just the Door Cut out.
topher0002:
This is also out of order, I did the t-molding slots before construction of the cabinet obviously....here are those pics.
topher0002:
Here is the control panel after buttons in place and wiring done, starting to look like a nice cabinet minus the dust
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version