| Main > Main Forum |
| Mame Cabinet - Utilising Orig Coin Door & Orig Speaker etc . questions |
| << < (2/2) |
| Turnarcades:
Take care when running a commercial coin mech signal to an I-Pac not to damage it. The documentation will tell you that the interface expects a 5v signal, not 12v as most commercial mechs put out. When using Ultimarc's mech/door you have to use a 5v zener diode to step it down to 5v and though many people have said they run the connection direct without converting it to 5v, I personally wouldn't risk frying a 'pac. |
| Vicious Burger:
--- Quote from: Turnarcades on June 02, 2009, 08:36:39 am ---Take care when running a commercial coin mech signal to an I-Pac not to damage it. The documentation will tell you that the interface expects a 5v signal, not 12v as most commercial mechs put out. When using Ultimarc's mech/door you have to use a 5v zener diode to step it down to 5v and though many people have said they run the connection direct without converting it to 5v, I personally wouldn't risk frying a 'pac. --- End quote --- Good point,thanks for the advice. |
| Navigation |
| Message Index |
| Previous page |