| Main > Main Forum |
| Help with Spintrac Minor Connection Problem |
| << < (2/2) |
| turnergw:
I recently had a similar problem with the SpinTrak - Andy helpfully sent me the connector with another order, but even so, the wiring didn't match the MiniPac inputs. Much like mlalena, I had to rewire the SpinTrak, but the power wires were the opposite way around to his diagram, so the wiring seems to be a bit inconsistent on these! For what it's worth, on my MiniPac at least, the wiring diagram shown on the Ultimarc site is wrong - the power connections for the spinner are the same as for the trackball (pins 2 and 3, not 1 and 4 as shown in the diagram) It took a bit of fiddling, but I've now got a SpinTrak and a U-Trak trackball hooked up to the MiniPac and working fine. This was after several frustrating issues of the Trackball Y-axis being the wrong way round, the Spinner not working at all, or only moving slowly left ... but with the right wiring, all was well. Good luck with yours! |
| Section_25:
Well, after a snag with a " cable problem" I think I am back in business. Everything seems to be working now except the spintrak. I'm pretty sure that it is a wiring issue, so I am waiting for a reply from Andy about it. Anyone know for sure which colored wire connects to which with the newest mini-pacs? This is the last problem to overcome, so I'm getting there slowly but surely. |
| Navigation |
| Message Index |
| Previous page |