| Main > Main Forum |
| Life-Size Katamari Lives |
| (1/2) > >> |
| nazerine:
http://www.kellbot.com/2009/05/life-size-katamari-lives/ Sweet. Since discussed in http://forum.arcadecontrols.com/index.php?topic=91948.0 thread I had thought about and wanted a Katamari cab.. Wife 100% supports building Katamari cabinet after seeing the video. :w00t This seems like a very good tinkering project to find something that will work well and give a good katamari feeling :laugh: |
| Blanka:
I saw it too, and a Katamari-cab to follow the Retro Space is in the pen. I liked the idea about the giant ball, but it has a problem for the gameplay. - The tank-stik operation only uses the analog part of the controller for the turning, not for the rolling speed. You should discard this input with a ball. - A trackball does not work as it does not react to turning the ball at the same point. You need two mouse-balls following the same huge ball, and like the girl did, use a microcontroller to translate the input two tank-stick commands on a normal PS2 port. - You need seperate buttons for fast rolling and 180 degree spinning. Maybe you can have the microcontroller translate fast normal rolling into the double tank-stik fast-roll command. The 180 degree turn is hard to add to the control. The fun about Katamari is that the controls are so simple. A seperate button for the spin would ruin the concept. - If you make a huge trackball and have that one operate 2 mice, i doubt its ruggedness. Guess the tank-configuration is the most logic one for a cab. It even mimic the Cousin pushing the Katamari. Your two hands do the same as the cousin's. |
| nazerine:
With using the arduino there are many programming possibilities. I was thinking about how the ps2 library could be used to detect 'trackball gestures' |
| Bender:
couldn't you make a trackball for a PC out of almost any round object using just a optical mouse? if so, this opens a bunch of alternate designs possibilities for trackballs anyone know where to get the base rollers she used in that video? |
| jasonbar:
--- Quote from: Bender on May 27, 2009, 01:08:26 pm ---anyone know where to get the base rollers she used in that video? --- End quote --- Look up "ball transfer" at mcmaster.com -Jason |
| Navigation |
| Message Index |
| Next page |