Main > Main Forum
Happs Trackball Question!
Pages: (1/1)
BobtheAddict:
This weekend I was testing out my control panel and it seems I mounted the trackball in the wrong direction. Instead of mounting the roller ball with the arrow facing in the up position, it is pointing to the left.
I already have it mounted and sealed up with bondo and there is no way I can spin it around to the right direction. Do you know if there is a way in Mame or Windows XP that I can change the direction on the roller ball.
If not, I am screwed! :banghead: Any help is greatly appreciated.
Here is a picture of the trackball in case you need a visual.
Paul Olson:
Swap the plugs on the optic boards, then you should be OK. If the axes are correct but the direction is reversed, you can reverse it in MAME.
BobtheAddict:
Does it make a difference if it is USB?
http://www.happcontrols.com/trackballs/560100e.htm
Pages: (1/1)