| Main > Main Forum |
| Happs Trackball Question! |
| (1/1) |
| BobtheAddict:
This weekend I was testing out my control panel and it seems I mounted the trackball in the wrong direction. Instead of mounting the roller ball with the arrow facing in the up position, it is pointing to the left. I already have it mounted and sealed up with bondo and there is no way I can spin it around to the right direction. Do you know if there is a way in Mame or Windows XP that I can change the direction on the roller ball. If not, I am screwed! :banghead: Any help is greatly appreciated. Here is a picture of the trackball in case you need a visual. |
| Paul Olson:
Swap the plugs on the optic boards, then you should be OK. If the axes are correct but the direction is reversed, you can reverse it in MAME. |
| BobtheAddict:
Does it make a difference if it is USB? http://www.happcontrols.com/trackballs/560100e.htm |
| Navigation |
| Message Index |