| Main > Project Announcements |
| Atari Xevious Bartop 10" VGA CRT |
| (1/42) > >> |
| retrofuture:
It's taken a while, but here are some initial designs for a Xevious Bartop. Zorg kindly supplied me with his fantastastic vectored artwork around which the design is based. :applaud: I'm trying to be as sympathetic as posible to the original cabinet design while it scaling down - hopefully retaining the classic Xevious shape. |
| retrofuture:
Tiled print out with 10" CRT for scale. Traced and ready to cut. |
| retrofuture:
Got some time today to cut out the sides. Starting with an MDF template. I made 4 extras (two shown here), I'm building two of these - one for my brother and one for me - as we're both big Xevious fans. I'll keep the template in case I build another one at some point in the future. Then routed the T-Molding slots out. Test fitted some T-Molding. I think I need to by a glue gun, it's fairly snug across the flats, but springs out on inner and outer curves (even with v cuts). Maybe my cutter's too big, or my T-mold's too small... |
| retrofuture:
The Atari switches have arrived. I'm going to be using original tall plastic cones . |
| TOK:
Xevious is one of my favorite games ever. Looks tight with the monitor in there. Once the controls are in, are you going to have room for the computer? |
| Navigation |
| Message Index |
| Next page |