| Main > Main Forum |
| Need Help with Spinner and Trackball |
| (1/2) > >> |
| genesim:
I have searched the archives, but I admit that I don't really know how to search specifically for this problem. I am getting tired and I don't seem to be able to get the answer at this time. Plus I have never had this happen. Spinner (Spintrak) only goes in Y direction(up/down) Happs trackball only goes in X Direction(left/right). I am running in Windows XP. Is there an option that you can either make each totally independent of each other? Or at the least they duplicate the movement? Well I know it can, but I can't remember how. Only thing I can figure is some mouse drivers that I installed mucked it up. Any help is great appreciated. |
| Ginsu Victim:
USB or PS/2? All the time, or just in MAME? |
| drventure:
I had this happen and it ended up that I was trying to drive too much on the usb port they were connected to. Once I got a good powered USB hub, everything started working fine. |
| genesim:
No one is going to PS/2 and one is USB. This one baffles me. Still, can't hurt to at least try the USB port going through the PCI slots, that is how I had it before. |
| genesim:
Figured it out!! Two problems. The Spintrak had a jumper issue. I lost it. ;D If it ever had one. At any rate I put one on, and I guess it makes it a slave..or enables the other coordinate(x-axis instead of y). Second problem..Happs trackball worked best in USB. While the above seemed to fix the movement after plugging it into a PCI USB I got much better results. Both work fine now. |
| Navigation |
| Message Index |
| Next page |