So I started to work on the artwork restoration... the edges of this panel were all frayed, crumbly and peeling. I decided to cut the white off so I used an exacto knife and cut the white very close to the black outline. I then masked the artwork with painters tape and newspaper. After some sanding and bondo application to fix the damaged edges, I put 4 coats of Rustoleum white semi sanding with 400 grit sandpaper in between coats. It looks very very good.
What I have left to do is fix the damage of the artwork itself. Now I plan on using hobby paint mixed to match... its only 3 colors, black, orange(lt/dk) and blue... so it shouldn't be too difficult.
Once I'm done with the touch up... I will spray coat the entire thing with Minwax polycrylic clear coat. Once this is done, I can put it back together... the other panel has the coin door and does not need any touch up other than the white paint which takes no time.
In preparation of final assembly I've ordered all the fasteners for this machine... here is a pic of all of the "internal" fasteners (wood screws, carriage bolts, lock nuts, washers etc..) I'm waiting on the black-oxide carriage bolts for the control panels.