| Arcade Collecting > Restorations & repair |
| Super Off Road restoration |
| << < (26/26) |
| bratwurst:
Probably not enough to do that isn't any different or even better than what is already in this thread. I have replaced the plexi on the front that was damaged, replaced the power cord, and scrubbed a lot of the dirt and grime off the machine. Mine will entail: * I will clean up and try to get the wheels working as nicely as possible. * The metal for the middle player wheel is really bent up on mine, so I am trying to straighten it out as best I can. * One of the buttons is broken, so I will be replacing it. Because the others look to have lost some of their color I might just replace them all. * The admin button is missing too - just a hanging leaf switch that doesn't work and no button. So that needs to be replaced. * All the T-Molding is in need of replacement. I was thinking of using something other than black but I think that will show some of the spots that the cabinet has swollen wood. * Top of the CPO needs new artwork. Probably not in the budget just yet. If and when I do replace that, I might just replace that entire piece of wood too. * The pedal covers are missing - not sure where to source them. * Bottom right side of the cabinet the wood and laminate are in very bad shape. |
| dynamiteseed:
--- Quote from: ZORK2 on June 22, 2009, 09:23:09 pm ---Hey Paul your game looks better and may actually WORK, but I'd like to bet your pedal panel doesn't look THIS GOOD! :) Let me know if you need me to explain any of the dimentions to you.... --- End quote --- Hey ZORK2, could you please message me about your pedal panel? |
| Klaatu42:
I know I am resurrecting an old thread, but as this thread is one of the few results in Google for this topic, and everything in it is still valid, I thought it would be ok and helpful for people searching for this information. I just posted a 3D printable model of that steering encoder wheel to Thingiverse (link below). If anyone needs replacement encoder wheels, grab the file and print or have a friend w/ a 3D printer some off for you. I printed my first test in black ABS and was shocked that it worked right away without having to tweak anything. https://www.thingiverse.com/thing:2760779 |
| Navigation |
| Message Index |
| Previous page |