Main > Main Forum

Ikari Sticks and Opti-PAC

Pages: (1/1)

Beaps:

Hi All,

I got an SNK Ikari Stick and wanna wire it to my Opti-PAC.

The problem I have is I dont have a clue where to start. Do I run wires from microswitches to the Opti-PAC or from the large lomb on the bottom?



Ninten-doh:

Not sure if you can use an Opti-Pac for what you want to do, but Ultimarc has a dedicated interface for this for interfacing the 13 pin wiring harnesses:

http://www.ultimarc.com/rotary.html

The microswitches are connected as any regular joystick would be connected.  I think Randy T at GroovyGameGear has a rotary solution as well.

Good luck!   :cheers:

Pages: (1/1)

Go to full version