| Main > Main Forum |
| Ikari Sticks and Opti-PAC |
| (1/1) |
| Beaps:
Hi All, I got an SNK Ikari Stick and wanna wire it to my Opti-PAC. The problem I have is I dont have a clue where to start. Do I run wires from microswitches to the Opti-PAC or from the large lomb on the bottom? |
| Ninten-doh:
Not sure if you can use an Opti-Pac for what you want to do, but Ultimarc has a dedicated interface for this for interfacing the 13 pin wiring harnesses: http://www.ultimarc.com/rotary.html The microswitches are connected as any regular joystick would be connected. I think Randy T at GroovyGameGear has a rotary solution as well. Good luck! :cheers: |
| Navigation |
| Message Index |