Main > Main Forum
Pulling my hair out - analog guns with Mame...help please!
1UP:
--- Quote from: jhuie on May 15, 2009, 10:44:46 pm ---Thank you for the tips...still no go though. The guns don't have adjustments like T2 does. They are just set the way they are going to be set it appears. And I already tried swapping out the pot. The one that was in there previously appeared to be unmolested and I suspect it was the original. The new one I put in seems to work exactly the same as the original.
--- End quote ---
I think I made an error as well. I believe the adjustment needed would be to the pots themselves, screwing off the nut around the pot and turning it to a different angle. Don't know if that does you any good...it's been a few years since I had a set of analog guns in hand.
jhuie:
I've tried that as well. I've tried setting the pot near the middle, near either extreme and at random other locations with similar results. It's odd that Gun #2 never required any adjustment at all and just worked after I calibrated it. I'm starting to wonder if something is wrong with the U-HID or if I actually wired something wrong. Except that it works....other than being way off positionally.
rusolinio:
Maybe another u-hid connected separately to the the other gun would work?
TheShanMan:
Have you tried swapping which gun is hooked up to which inputs on the uhid? If the problem stays with that particular gun, then it points to a problem with the gun. If it switches to the other gun, then the uhid would be suspect. At that point you ought to contact Andy at Ultimarc - he's really good with supporting his products.
jhuie:
--- Quote from: TheShanMan on May 16, 2009, 11:44:13 am ---Have you tried swapping which gun is hooked up to which inputs on the uhid? If the problem stays with that particular gun, then it points to a problem with the gun. If it switches to the other gun, then the uhid would be suspect. At that point you ought to contact Andy at Ultimarc - he's really good with supporting his products.
--- End quote ---
Good ideas. I'll try swapping them and if I can't get it then I'll contact him and see what he says. Thanks again.