Main > Project Announcements

My first pinball bartopcab! Now with video!

<< < (3/13) > >>

dkssprs:
i think this project will be very shiny.
I have a question.....is this pinball going to have a marquee or somthing with the name of it?
Keep up the good work.  :applaud:

edit: please upload the plans of your project....PLZZZZZZZ  :cry:
It will be perfect next to my bartop.

Hazzard:
Hi dkssprs!

My plan is to have the pro-pinball logo inbetween the speakers. And pro-pinball artwork on the sides and front. The cab itself will get a shiny (eyh..) black finnish.

I`m afraid I dont have any projectplans to upload, as it all has been sort of a step by step process.. If I had i would upload them for you  8)

Henning

t3design:
Hazzard,

you might check out my solution to a plunger. I got ideas from several threads here, then took it a little further:

http://forum.arcadecontrols.com/index.php?topic=90385.msg955772#msg955772

If you are interested I would be glad to send you some measurements.

t3

Hazzard:
Hey, that plunger looks sweet! How much does it cost? I`m happy to recieve measurements  ;)

t3design:
We bought the plunger here:

http://www.happcontrols.com/amusement/pinball/95008600.htm

I will have to get the thing out and measure the pieces, but a better explanation of what we did is here:

http://cowboyarcadeproject.com/?p=97

In the post there is a link to John's Retro Arcade where he explains a circuit to debounce an optical switch. We decided this was overkill and are going to use a standard push button and not worry about debounce.

If you have room and WANT the look of a real pinball plunger, just install the thing as it comes from Happ and then add the button stuff to interface to pinball.

Hope that helps.

t3

Navigation

[0] Message Index

[#] Next page

[*] Previous page