| Main > Main Forum |
| What is the best stick to use for a wood control panel, mounted from below? |
| (1/3) > >> |
| 2PacMan:
I'm making a MAME using an old pacman arcade cabinet. I'm working on the control panel, and I need to find a joystick that i can mount underneith the panel. The panel has 3/4th'' wood. I don't have a router or anything. Is there any joystick available with a longer shaft that i could just mount on the wood that wouldn't involve me using a router? |
| massive88:
Any non-japanese stick should mount fine in 3/4" wood afaik. |
| ArtMAME:
Happ Supers are my stick of choice for my MAME setups. Happ Universals are real nice too if you like the action a little stiffer. |
| 2PacMan:
I have one, can't remembe the name, it's one you can change from 4 to 8 way on top, and the shaft was so short that it i mounted it under the wood, the stick had to go through the 3/4 wood and then the small metal control panel that not much was sticking out from the top, it was too short. |
| Evil Ivan:
You could also get a different stick to put in the base, depending on what you have of course. I picked up some last week that were at least half an inch longer than the bat-handle my competitions came with. |
| Navigation |
| Message Index |
| Next page |