| Main > Main Forum |
| Hi, im new and i have a huge queston |
| (1/1) |
| briansltts:
i have a simpsons arcade game made by konami. everything on the game works except the 4 player buttons are not wired! there is no wiring left in the thing to see where it could runi've looked and looked for a place that i could run the wires to, but found nothing. there is one spot by the coin drawer where it looks like a harness could connect in, but im not so sure it is for that. please let me know what i would need to wire or buy to get this game opperational |
| BobA:
Here is a link to the manual for the simpsons arcade game. The game is a Jamma+ game which means that it uses a standard Jamma connector to connect players 1 and 2 and it uses harnesses that connect directly to the mother board for players 3 and 4. All the wiring details are in the manual. PS you question is posted in the wrong place. The main forum might get a better response. Hope that helps. ;D ;D http://www.basementarcade.com/arcade/library/manuals/s/simpsons.pdf |
| briansltts:
haha whoops :-\ so is this the kind of harness i will need? http://jammaboards.com/store/konami-jamma-3rd-/-4th-extra-player-harness/prod_126.html |
| BobA:
Looks like what you need. |
| Navigation |
| Message Index |