Arcade Collecting > Restorations & repair
star castle
Kevin Mullins:
Check for fuses and the fuse holders first.
Does the marquee or coin door light up?
hammyysu:
i used a multimeter on it and there is power and the marquee lights up and the coin door bulbs are blown but i got a reading on my voltmeter. getting pics so you know what you guys are looking at.
Kevin Mullins:
--- Quote from: hammyysu on April 27, 2009, 05:13:18 pm --- and the light on the pcb board is out now.
--- End quote ---
According to the manual it should be out after the start up sequence.
Does the LED do anything as soon as you turn the power on?
Have you checked the +5 volts according to the manual?
There appears to be several voltages that specifically need checked.
+5v DC
+25v DC
-25v DC
6.3v AC
etc.
hammyysu:
yes i have the manual and i did check all the voltages and they are good the board is not lighting up now. no clue what happen. i am lost i might just put another board in it. another star castle board. if i can find one.
WunderCade:
--- Quote from: hammyysu on April 27, 2009, 11:52:15 pm ---i am lost i might just put another board in it. another star castle board. if i can find one.
--- End quote ---
http://forums.arcade-museum.com/showthread.php?t=88205
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version