| Main > Main Forum |
| To 'romize' PCBs! |
| << < (3/3) |
| DeathMonk:
--- Quote from: grafixmonkey on July 03, 2003, 12:01:21 pm --- Just a bit of idle curiosity. (very U.S. too - may or may not make any sense to you people in australia and UK etc.) --- End quote --- I'm sure they're not retards. ;) |
| grafixmonkey:
??? >:( It's a law that to my knowledge only exists here in the US, and was enacted a year or two ago. I was trying to be considerate of the people in this forum not from the States. :P |
| Hoe:
If you're making a basic rom programmer/dumper, you can make one off of a socket, some 74x299's, some thing to power it (7805/heatsink) and a parellel port connector (then of course some programming). If you're going to buy one that can dump roms straight off the pcb, it's probly going to cost a bit. You don't need a 2.5k$ rom programming like The Guru has. Some one mentioned carts, if you're dumping a cart it works exactly the same, except instead of a socket for a dip chip, you'd use a socket for what ever cart type you're dumping (mcmelectronics sells NES, SNES, and GB pin connectors) |
| F|end:
I prefer to leave that with experts! :) |
| Navigation |
| Message Index |
| Previous page |