Main > Main Forum

J-Pac Through Supergun - I need to test this...

Pages: << < (2/2)

Malenko:


--- Quote from: slapaham on April 15, 2009, 10:18:54 am ---No... I agree with you Malenko - IT IS a stupid idea! But its the only way I can test my J-Pac until my Jamma cab eventually gets here from Japan. I think I've concluded that it is working okay - it seems to be doing everything it should be.

--- End quote ---

sounds like it is. its blocking bad resolution signals from going out , but its best to just wait for the JAMMA cab to arrive. You do know you need either soft15 or an arcade VGA to output from the PC to the cab right?

slapaham:

Sure do... I think it will be Soft15khz for me... I will be spending a lot of money on other bits and pieces from Ultimarc in a couple of months time so need to economise! ;)

swamprat96:

That bad boot picture could be a missing video ground- Pin 14 on the jamma plug component side. I had exactly this on boot and Joey from Jomac picked it. Check pin 14 with a meter to ground. Mine was entirely missing and I just jumpered it from the main earth (pins 1 +2)

I bought a cheap Jamma game of ebay for a testing unit. Use it all the time now

Pages: << < (2/2)

Go to full version