| Main > Main Forum |
| Dual Display using indash 7" LCD on Mameroom UAII |
| (1/2) > >> |
| jeffremiller:
Now that my project is nearing completion - cab is very playable... I am looking at potential upgrades. One of which is using Marquee Magician: http://www.gameex.info/forums/index.php?showtopic=6911 To show CPWizard controls for each game on a small LCD. I am considering mounting this either below the monitor (which is raised about 3" from the bottom of the cabinet) or using a fold down LCD between the speaker grilles in the speaker area. Has anyone done this with a small LCD as a second monitor? I have done some searches for second monitor, etc but no one shows pictures. Thanks... looking forward to where this group could take a project like this... |
| Kayden:
I know an LCD of choice in a lot of modding communities is the PSOne LCD: ebay link shortened Here's a pinout for it: http://www.gamesx.com/avpinouts/psxav.htm There probably isn't much that hasn't been done with this screen, so there should be plenty of documentation if you look. |
| jeffremiller:
Good Info Kayden! Thanks. But I'm not sure 5" is large enough to really see... and the one's I am looking at are touchscreen too (for possible Juke Box apps) Like this one: Long ebay link shortened Or this one for flip down: Second ebay link shortened |
| Kayden:
I have no experience with touchscreen beyond laptops or POS units, but size wise, I think 5" is plenty for displaying just a control panel. However, if you do want to use it for a juke, then I suppose you'll want a touchscreen if a CP full of buttons isn't enough. =P |
| jeffremiller:
Or this one: http://www.slashgear.com/samsung-syncmaster-u70-7-inch-usb-companion-display-0533156/ Not touchscreen but I see your point with all the CP buttons. |
| Navigation |
| Message Index |
| Next page |