| Main > Main Forum |
| Happ Competiton Shaft Dimensions? |
| (1/2) > >> |
| Franco B:
Does anyone have the dimensions of the Happ competition shaft? I'm after the following lengths + the diameters of the shaft. A: Distance from the end of the shaft to the start of the e-clip groove B: Distance from the end of the shaft to the start of the 2nd e-clip groove (or 2nd shaft diameter) C: Distance from the end of the shaft to the bottom of the bat. D: Ignore, I know its 146mm I'm not sure if the 2nd 'line' on the shaft is a second e-clip groove or a change in diameter. IIRC, the black section below the bat is a sleeve. Is that correct? If you could also tell me the dimensions of the diameters of the shaft, including the e-clip groove(s) that would also be great. I doubt if anyone has this data to hand but if someone with a digital vernier etc has a comp stick that they could measure I would appreciate it. :cheers: |
| kowal:
iL euro joystick C-88mm D-147mm A-2mm B-9mm and E - 19mm (III groove) competion C-89mm D-146mm A-2mm B-9mm E-19,5mm |
| Franco B:
Thank you kowal :notworthy: :cheers: |
| kowal:
groove is 1mm shaft on end fi=10mm groove fi=7mm shaft cover fi=14,5mm iL, competion 14,7mm battop fi=32mm on iL and fi=31,5 on competion fi is diameter You need this dimensions for custom balltop? |
| Franco B:
Yeah, I'm making some Comp shafts with an M6x1 thread for the Seimitsu ball tops. |
| Navigation |
| Message Index |
| Next page |