Main > Main Forum

Second control panel

Pages: (1/2) > >>

cdbrown:

Carsten Carlos was a bit worried that I hadn't posted any questions in a while so here goes  ;D

I've got my first 4-player panel sorted for use with nba jam and street fighter type games.  I'm trying to work out what I should put on the second panel (I'm trying not to have a third at the moment).

I was thinking it would be for 2 players.  2 of those e-stiks from Andy so it can be changed 8 - 4 then 45 degree as well.  2 spinners. 1 trackball. I was thinking about puting the 2 Happs optical rotary joysticks as well.  Does this seem to be a reasonable type of cp?  Any recommendations on how many buttons to add?  I will be putting the trackball in the middle with 2 buttons, the spinners will be towards the back.  Is there anything I should look out for / add on / remove?  Connecting up to ipac4 and optipac.

Any responses would be appreciated  :D
Cheers
-cdbrown

JustMichael:

Why 45 degrees?  If you are doing this to play qbert you can set Mame to only accept the diagonals from an 8-way stick.  I think th optical rotary joysticks would be nice.  For each player of a 2 player setup, I would put one joystick on the left- 7 buttons in the middle and a trackball on the right.  This setup will cover most games.


cdbrown:


--- Quote ---Why 45 degrees?
--- End quote ---


JustMichael:

It sounds like the T-stick may be in the way of using the spinner.  I happen to like dual trackball games like Marble Madness that is why I have that idea.

cdbrown:

I was thinking of a layout similar to that on this page http://www.significantbits.com/ac_controlpanel.php.  I wouldn't have the LCD or the seperate 4 way or as many buttons across the top.  Just haven't thought of a nice place for the spinner per players.  

There are games out there that will use spinners for two players - isn't there? or am I just kidding myself?

Have decided to go with the t-stiks as they look quite good and the happs rotary optical 8-ways.

For those with spinners amongst other things on the board where has been the best position for ease of use?

Cheers
-cdbrown

Pages: (1/2) > >>

Go to full version