| Main > Main Forum |
| Wiring Coin door to turn on PC - Microswitch? |
| (1/9) > >> |
| johnnyr:
Hey guys. I just got my coin door from happ, and it has the lights, but I don't know if it has miscroswitches or not. How can I tell? What would it look like? If I don't have it, what do I need to buy? Is there another way to do it? This is what I have: Thanks, John |
| Ginsu Victim:
You see those gold contacts at the bottom, with a silver colored one lower and to the left? Those are the switches. |
| johnnyr:
Ah...I do see those...How would I connect these up to trip when one of the top coin reject buttons was pressed? I can't seem to figure out way to mount it right. And will these microswitches work like a momentary switch? Thanks! |
| ivwshane:
They act just like your buttons on the cp. You may have some trouble doing what you want because you are missing the whole coin mech which would make things a lot easier. |
| johnnyr:
So I just need to mcguyver it somehow to get the reject button to trip the switch? |
| Navigation |
| Message Index |
| Next page |