Main > Main Forum
What are good tools to use.....?
Pages: (1/1)
studmuff:
What tools should I use to cut out a coin door hole? Finished plywood 3/4".
I tried a jigsaw but I was bouncing off the plywood. I'm obviously not a handyman.
Making a pin cab for vp and fp cab.
Thanks.
Tom.
BobA:
If your jigsaw is bouncing you may not have the proper blade in it or are not holding it down correctly. Make sure you have a good sharp wood cutting blade in it. Also it is a good idea to drill pilot holes at the corners to make it easier to start the cut.
studmuff:
Thanks bob I'll give it a try.
Tom.
studmuff:
Jigsaw Worked good! I actually made a 3/4" circle with a drill to get me started. Thanks for the tip Bob.
Tom.
Pages: (1/1)