Arcade Collecting > Restorations & repair
Pac Man 'Mini' cab project.
orion:
--- Quote from: Pacman83 on April 16, 2009, 04:34:06 pm ---
QUESTION - Which way around does the harness fit to the PCB ? I have no idea as there wasn't a PCB when purchased.
--- End quote ---
Looks to me judging by the pics that you got it right, but I am assuming that the wire color coding on a Mini Pac Man from Europe is the same as a stand up in the U.S. Your board looks identical to mine so it should be. Just to be sure here is a link to a Pac Man pinout (if you haven't found this yet)
http://www.mikesarcade.com/cgi-bin/spies.cgi?action=url&type=pinout&page=Pac.html
Pacman83:
Thanks Orion. It is correct.
I just need to get the monitor sorted out now as there is no picture, just a 'raining' effect of Pac Man 'blue'.
I'm going to take it to a monitor specialist and have the cap kit & new Flyback fitted at the same time.
When the picture is sorted out, I'll fit the final parts and it'll be good to go ! ;D
Level42:
Looks like a sync problem to me.
SirPeale:
--- Quote from: Level42 on April 19, 2009, 07:14:23 am ---Looks like a sync problem to me.
--- End quote ---
Agreed. Adjust your H and V hold and see if it changes to a more stable picture.
Level42:
Looks like H and V sync reversed to me....
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version