| Main > Main Forum |
| Think I fried my jamma board |
| (1/1) |
| swamprat96:
:angry: OK My fault. The jamma plug on this cab has no locating pin in it. I think I inadvertently put +5vdc onto the ground pin or even maybe +12vdc onto the -5vdc! No burning or bang but no boot now either- and it did before Any obvious thing to check? Its a lethal enforcer konami jamma board. I'm going to do a conversion anyway but I still feel pretty stupid |
| Turnarcades:
You may have permanently fried it either by burning and cracking some small tracks or toasting one or more of the rom chips. |
| Kevin Mullins:
Yup, done that before.... After doing that one time I always remember now that the power side of the harness always goes to the short section of the JAMMA edge connection on the board. I don't even bother looking for a label or key anymore, I just want to know where the power side is. What game was it ? |
| swamprat96:
lethal enforcers - not great but it worked before I touched it :cry: |
| Navigation |
| Message Index |