| Main > Main Forum |
| Help me repair this Dead Street Fighter 2 Bootleg Jamma - clueless individual!! |
| << < (6/6) |
| Kevin Mullins:
--- Quote from: slapaham on March 10, 2009, 05:04:46 pm ---There appears to be 2 points on one of the chips that have small blobs of solder - --- End quote --- The small part you are looking at is a resistor... Is the one that is broke loose currently attached to the board or a chip near it? (was hard to tell in the pics) If it is currently connected at one end to the board, then the other end should go on that chip leg that looks like it has solder on it. If it is currently connected to that chip, then you'll have to look for tiny remnants of where it may have been attached. You are most likely correct in that if there are solder dabs on chip legs, then there should have been something attached there. Most likely another resistor. You'll have to look at the color rings on the existing resistors and see if it looks like they are all the same value or not. That will give you an idea if the "missing" one should be the same value. Stuff like that is usually very minor.... the board should still do "something". |
| slapaham:
Mmm, well, shouldn't cost much to give it a go - or do you really think its not worth the bother? I've figured out where all the resistors should go - I'm pretty sure I've figured out where the loose one should connect and have pushed it against the leg - still a black screen - will try and track down the correct resistor and attach that to the solder marks when I find a big of time. I've got to admit - generally, the board looks in pretty good shape/condition - I will try looking at it under a microscope once I've tinkered with the resistors! Thanks for the feedback guys! :cheers: |
| Navigation |
| Message Index |
| Previous page |