Main > Main Forum
Help me repair this Dead Street Fighter 2 Bootleg Jamma - clueless individual!!
(1/6) > >>
slapaham:
I have recently got everything I need to build a supergun (which I'm possibly intending to put into my arcade cab eventually)

I bought 4 PCBs recently to try it out - I received the first one today - Gold Medalist by SNK - after lots of fiddling (think, this may have been due to the TVs and leads I was using, I got it to work! :))

One of the other PCBs I'm getting is marked up as possibly being Street Fighter 2 - here's some photos of the pcb -











Anyone confirm this? If it isn't SF2 then thats a little disappointing but I can live with it - however, if it isn't, what on earth is it!?

Also, do I need anything other than the pcb and my supergun to run it?

This comes as untested (though I'm always suspicious when it says that!) - if it doesn't work, then how much would it cost to get it repaired?

Thanks for your help! :cheers:

Chemixtry:
You shouldn't need anything else except maybe a kick harness if you havent wired your supergun for six button per player. There are website you can look up pcbs -
http://pcbdb.net/?list|S=2
There are several version of street fighter, you'll have to compare them. If i remember right there should be a pcb# by the capcom logo on the board that should make the search faster.
Ginsu Victim:

--- Quote from: Chemixtry on March 04, 2009, 03:26:57 pm ---If i remember right there should be a pcb# by the capcom logo on the board that should make the search faster.

--- End quote ---

Which brings up the question:
Is there a Capcom logo on this board?
slapaham:
Thanks for your help - thats what I wanted to hear - I knew I'd need a kick harness but wasn't sure if there was anything else - so I should have everything I need to test it anyway! :)

I'll see if I can figure out whether or not it's SF2 from the photos - I havent received it yet so cannot check the number you've mentioned. Anyway, I'm hoping (though doubtful) by that point I'll be able to set it up and get it working and hopefully that'll give me some form of confirmation!
Ginsu Victim:
Street Fighter II does use a YM2151 audio chip plus the OKI6295, but so do a lot of other games. I also see a Z80 in that pic. And I see an MC68000.
Navigation
Message Index
Next page

Go to full version