Arcade Collecting > Restorations & repair
Berzerk restoration - need PICS !!
Luigi:
OMG...I completely missed this
--- Quote ---I can do that.
--- End quote ---
...I'm....sorry :-[
I guess my eyes were pulled to the picture like a nail towards a magnet ::)
OK, no need to hurry....I will wait for the picture....btw. can you tell me how the PCBs are mounted to the board? Screws with separators I guess...
Thanks! :cheers:
ChadTower:
BTW, here is page five of the manual. It tells you everything you need to know about the layout. If you don't have the manual you really do need it for this game as the self test procedure is critical for getting it going.
The boards are mounted with metal rails. The layout could be approximated with spacers or angle aluminum.
Luigi:
Yeah, I know the manual, already printed out. And I think the layout of the PCBs is given with the connectors to other PCBs...but I wanted to be sure...so if you don't mind..... :)
ChadTower:
I can still get the pics. I'll take them with the ZPU out so you can see the brackets. Do you need pics of the drawer sliders too? That appears to be standard cabinet hardware you could pull from a piece of old furniture or pick up at a hardware store.
Luigi:
After cleaning and giving some oil the sliders work perfectly again, thanks, no pics of them needed :)
Don't know if you saw the pictures in my blog. Here's what I am starting from:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version