| Main > Main Forum |
| Wiring up a control panel advice please |
| (1/3) > >> |
| Marky_1979:
Hi guys, Im about to attempt to wire up my arcade control panel and have purchased a wiring kit from Ultimarc and was wondering if you guys could give me some tips on making it all look clean and getting it right. I have no real experience doing this and will be wiring up 3 admin buttons, 2 joysticks, 12 leaf switches and 3 pinball buttons on side of cab into an Ipac2. |
| javeryh:
Daisy chain the grounds together to GND on the iPac and run wires to the individual nodes on the iPac from the NO prong on the switch. I'm not sure what other advice I can give you... If you want to keep it neat, invest in some ties and the little sticky things that the ties run through, plot a course for the wires generally and then tie everything together... |
| Encryptor:
Check out mountains wiring on his control panel in this thread. http://forum.arcadecontrols.com/index.php?topic=63629.msg673766#msg673766 He tells you where to get the stuff to do it in this thread. http://forum.arcadecontrols.com/index.php?topic=63629.msg674587#msg674587 Encryptor |
| wooowman93:
dont look at mountains hes a miracle wireer hes like magic and dont try something as neat as him its really hard |
| TelcoLou:
--- Quote from: wooowman93 on February 25, 2009, 09:18:54 pm ---dont look at mountains hes a miracle wireer hes like magic and dont try something as neat as him its really hard --- End quote --- Very helpful advice (¬_¬) |
| Navigation |
| Message Index |
| Next page |