Main > Main Forum
GP40 Wiz Help
<< < (3/3)
RandyT:

Heh, no problem.. That makes things a little more clear.  But still, if everything works in the control panel, and it works in some games, then I can only assume that MAME is set up to properly recognize the control.  At this point, you need to make sure that the games you play are set up to recognize the way you have the board wired.  If you already have custom configurations set up, the default configuration will be ignored.  You may have to  delete, or edit the custom configs to reflect the current control scheme.

RandyT

mrx88:

--- Quote from: RandyT on March 02, 2009, 05:00:42 pm ---
Heh, no problem.. That makes things a little more clear.  But still, if everything works in the control panel, and it works in some games, then I can only assume that MAME is set up to properly recognize the control.  At this point, you need to make sure that the games you play are set up to recognize the way you have the board wired.  If you already have custom configurations set up, the default configuration will be ignored.  You may have to  delete, or edit the custom configs to reflect the current control scheme.

RandyT



--- End quote ---

That is the odd part MAME was not reading the stick or buttons at all until I forced it to but it is reading the p1 side of things fine.
Navigation
Message Index
Previous page

Go to full version