| Main > Main Forum |
| Question on Dreamcast adaptor with the IPAC. |
| << < (2/4) > >> |
| evitagen:
Well I already have an Ipac, but I only use it for MAME currently. So apparently I would have to buy the $99 Dreamcast set-up from Ultimarc and just plug it into my existing Ipac, right? I wonder if I could plug it in through the "Keyboard passthrough" part of the Ipac so I could have both the Dreamcast hooked up using my control panel and the PC at the same time. Any thoughts on that? Also I'm looking at emulation. I hear NullDC and a couple others can emulate the game... but can you use a DC emulator in a frontend since it isn't as simple as "play rom" ? Any body have any experience with it? All I really want is Marvel vs. Capcom 2, to be perfectly honest. That is all. I just want it in my cabinet using my control panel without having to modify too much. Thanks for all of the help guys. |
| ViciousXUSMC:
--- Quote from: evitagen on February 11, 2009, 05:09:48 pm ---Well I already have an Ipac, but I only use it for MAME currently. So apparently I would have to buy the $99 Dreamcast set-up from Ultimarc and just plug it into my existing Ipac, right? I wonder if I could plug it in through the "Keyboard passthrough" part of the Ipac so I could have both the Dreamcast hooked up using my control panel and the PC at the same time. Any thoughts on that? Also I'm looking at emulation. I hear NullDC and a couple others can emulate the game... but can you use a DC emulator in a frontend since it isn't as simple as "play rom" ? Any body have any experience with it? All I really want is Marvel vs. Capcom 2, to be perfectly honest. That is all. I just want it in my cabinet using my control panel without having to modify too much. Thanks for all of the help guys. --- End quote --- NullDC does not emulate MVC2 very well for me, it could be because I am on Vista x64 though. I have had it emulated perfect in the past but I was on XP then and think it was Chanikast. That emu wont run on Vista so I cant test it. so IMO the NullDC emu of it was not good enough and what has put me in the same position as you finding a way to integrate my arcade CP into the dreamcast system. $99 is hard to take down for the I-PAC adapter but it cost so much because its actually 3 adapters. Its the Playstation adapter they sell, and then two aftermarket playstation --> dreamcast adapters. Still $100 is too much to ask and why I am doing it myself now, the X-Arcade route is much cheaper than the I-PAC, they only want like $20 for there adapter. But you will find mixed opinions about the x-arcade stuff. Some say it has lag, others own it and say its fine. I would take an owners opinion at a higher value though. |
| evitagen:
--- Quote from: ViciousXUSMC on February 11, 2009, 05:19:41 pm ---NullDC does not emulate MVC2 very well for me, it could be because I am on Vista x64 though. I have had it emulated perfect in the past but I was on XP then and think it was Chanikast. That emu wont run on Vista so I cant test it. so IMO the NullDC emu of it was not good enough and what has put me in the same position as you finding a way to integrate my arcade CP into the dreamcast system. $99 is hard to take down for the I-PAC adapter but it cost so much because its actually 3 adapters. Its the Playstation adapter they sell, and then two aftermarket playstation --> dreamcast adapters. Still $100 is too much to ask and why I am doing it myself now, the X-Arcade route is much cheaper than the I-PAC, they only want like $20 for there adapter. But you will find mixed opinions about the x-arcade stuff. Some say it has lag, others own it and say its fine. I would take an owners opinion at a higher value though. --- End quote --- Yeah I'm honestly as we speak trying to figure out how to use Chanikast. I'm reading the instructions now, and stuff. I already have a gdi of MvC2 and the emulator set-up, I just can't seem to get the game running... Plus I want to be able to use this in my front-end so It's at least SOMEWHAT seamless, even though I'll have to lift up my Control Panel to swap out one cord(if I go the route of the Ipac adaptor)... Speaking of, though... You can save a lot of money by purchasing the Total Control DC adaptors from playasia and just buying the PS2 adaptor from Ipac. They are only like $18 at playasia. So two of those plus one PS2 adaptor from Ultimarc should only be like 75 instead of 100. Still high, though. I hope this emulator works well. If anyone has any help on getting this to work with a frontend(I use mala) then any help would be greatly appreciated. |
| pmc:
--- Quote from: evitagen on February 11, 2009, 01:24:42 pm ---So I'm wanting to set-up my Dreamcast in my cabinet(Honestly mainly for Marvel vs. Capcom 2) and I would love to be able to use my control panel for the Dreamcast. I have an Ipac, so is this possible without re-doing a lot of stuff? --- End quote --- What I did was to hack some controllers and then wire them to the Control Panel via a connector I made. I unplug my IPAC and plug in my hacked controllers. When I'm done with the Dreamcast and want to use MAME, I just switch back. Personally, I like keeping the DC and the IPAC/PC electrically isolated. And it was cheap and fairly simple to do. If you don't want to hack your own controllers, HarumaN will sell you them. -pmc |
| ViciousXUSMC:
--- Quote from: pmc on February 12, 2009, 12:01:28 am --- --- Quote from: evitagen on February 11, 2009, 01:24:42 pm ---So I'm wanting to set-up my Dreamcast in my cabinet(Honestly mainly for Marvel vs. Capcom 2) and I would love to be able to use my control panel for the Dreamcast. I have an Ipac, so is this possible without re-doing a lot of stuff? --- End quote --- What I did was to hack some controllers and then wire them to the Control Panel via a connector I made. I unplug my IPAC and plug in my hacked controllers. When I'm done with the Dreamcast and want to use MAME, I just switch back. Personally, I like keeping the DC and the IPAC/PC electrically isolated. And it was cheap and fairly simple to do. If you don't want to hack your own controllers, HarumaN will sell you them. -pmc Same thing I am doing except I got this: http://www.monoprice.com/products/product.asp?c_id=101&cp_id=10103&cs_id=1010305&p_id=1354&seq=1&format=2 So I can just turn a dial to swap over to the different system. Not that swapping a cord is incredibly difficult. But the DB25 cables & swtich were cheap. What kind of cord/interface did you use so that you can plug/unplug them? --- End quote --- |
| Navigation |
| Message Index |
| Next page |
| Previous page |