| Main > Main Forum |
| Any X-Arcade users out there? |
| << < (2/5) > >> |
| garnerb350:
--- Quote from: Burns711 on February 11, 2009, 10:40:14 am ---As far as your joysticks not working right off the bat, it's probably that you either have Num Lock on or off. I can't remember which one X-Arcade uses. So give that a shot. You should never have to reassign your joys. --- End quote --- Num Lock was on....My FE didn't have the cfg...I went and dloaded it.... I was just wondering if everyone who has x-arcade...do they use Mode 1 or do they start off the bat and program their settings with the other modes (mode 2-4) Also...do all x-arcaders go through the MAME game list and changed the default game controls and change it to fit their x-arcade, OR is there just a setting on MAME to pick to bypass it.... Now I am confusing myself...here....let me try this Computer has... MAME32 v129 Daphne 1.0 SK Jukebox anytime should be receiving all Roms for NES/SEGA Visual & Future Pinball Mame was installed last month...I went to the help file located in options and set my options to what the suggested setting were on the list. Just got tankstick yesterday... Is there anything special that I need to do...? Am I going to have to click on each game and change the controls settings? What would you do? Please be gentle with the noob...he is learning...and also suffering from mental deficiency :dizzy: |
| Burns711:
I used the mode that it was on originally and haven't touched it. I can't speak for any emulator other than MAME, because that's the only one I use. You propably have to go into MAME32 (not through the FE) and enable your Tankstick. Have you tried that yet? In MAME, use TAB and setup your general buttons. You really don't have to do that, but I changed a few buttons on the X-Arcade for admin purposes. Sometimes, it assigns games to have awkward buttons. If I come across those, I just TAB and change it for "this game only". |
| garnerb350:
If I remember straight...( I'm away from my cab) in MAME I have everything set to my mouse (i.e trackball)...In the Help file in Mame...you see the suggested settings...(i changed mine to reflect those) I think I just need to take a deep breath and step up to the plate and start at 005 and work my way to Zyzzzzuk... Hopefully , I'll see my daughter graduate from I'm old and gray ( she's already 2) |
| Burns711:
Haha, it's not that bad. I'm going to tell you how I have MAME setup. Give that a shot when you get a chance and let us know how it worked. Here we go: Open MAME32 the .exe file(I'm using v120), NOT through your FE. Go up to "Options" and click "Default Game Options" On the "Controller" tab, check "enable mouse input". On the same tab, make sure that "Use Multiple Keyboards" is NOT CHECKED. X-Arcade thinks it's a keyboard so make sure of that. Then on "Controller Mapping", the only options I changed were the Trackball and Lightgun to "Mouse". So...those options and your X-Arcade .cfg file should make it work just fine. |
| severdhed:
check your mame.ini file, under core input options you should see ctrlr, set it to xarcade CORE INPUT OPTIONS # ctrlr xarcade mouse 1 joystick 0 lightgun 0 multikeyboard 0 multimouse 0 offscreen_reload 0 steadykey 0 joystick_map auto joy_deadzone 0.3 joy_saturation 0.85 |
| Navigation |
| Message Index |
| Next page |
| Previous page |