| Main > Main Forum |
| Topgun II, how do I get both working at the same time? |
| (1/2) > >> |
| vetteguy112233:
I had both guns working just fine, but a friend of mine kicked the cord and his gun completely stopped working. Every since then I can only get one or the other gun to fire at the screen. Both guns will recoil and act normal, but only one SHOOTS the screen. I have reinstalled drivers, checked connections, settings of mame32 and I can get one or the other to work, but not both together. At first I thought maybe he broke the gun, but as I said, I can get one or the other to work. I see the red and blue crosshairs and each gun controls it's own, but only one will SHOOT the screen. |
| Loafmeister:
Within Mame, press TAB to enter the menu and ensure fire button 1 for the second gun is mapped to the appropriate device. The other day, my gun 1 didn't want to fire but it would track the cursor properly. When I went into the mame setup, I noticed that the tracking worked because it was set to "lightgun 1" but the fire buttons were mapped to mouse 5, when it should have been mouse 4. I remapped the button 1 again and it worked fine. The reason for this is because I always disconnect the USB hub, so as to preserve the life of the guns/LED's. Even though I reconnected them in the same USB hub, for some reason the PC allocated Gun 1 to a different "mouse" number. Whatever the case, it worked for me, so check it out, I have a feeling that's your problem. |
| vetteguy112233:
I hope this is my problem, but where do i find a list of what each control should be set to? |
| Loafmeister:
Not sure if I understand your question: - Start mame - Select a lightgun game (example: Operation Wolf) - press Tab - Using the enter key, select "input (this game)" - Using the enter key, select "P1 button 1" - Now press the trigger on your lightgun and it should assign the trigger as button 1. - Do the same for the rest. I've assigned the 2 button to the handle button ("C") and I've set the coin to "SE/BA" and the start button to the lightgun "start". That way, I don't have to press anything on the cab anymore. Hope that helps, Loaf |
| vetteguy112233:
What confused me was how Mame32 had them labeled. I expected to see, fire, reload.... not analog, dec, inc. What do they mean? It has: Lightgun X - Analog Lightgun X - Dec Lightgun X - Inc Lightgun Y - Analog Lightgun Y - Dec Lightgun Y - Inc |
| Navigation |
| Message Index |
| Next page |