Main > Main Forum
coin mech wires have disconnected
(1/1)
Broken:
i have no idea which wire goes into which hole. basically its 2 black wires 1 pink wire and one stripey black/orange wire.

its not really something i wanna play around with until i figure out which goes where. any help will be appreciated.

i'm using a electrocoin goliath arcade cabinet.



wires




coin mech


the wires connect to the holes beneath the 5 screws. (bottom right hand corner in the pic)
Broken:
bump.
SirPeale:
It's the weekend.  It's slower now because everyone is off building.

Please don't bump until it's off the front page.  It's only been seven hours.
CheffoJeffo:
Patience, young paduan ...

Where do those wires go ? What game is plugged in to the harness ?

Wire colours are not always (indeed, when there is question, most often are not) indicative of anything.

I would expect one of the wires to be a positive voltage for power, one to be a ground return for power, one to be a common ground and one to be a coin up switch.

Perhaps one of our UK friends can shed more light (WTF would somebody use a different 56-pin standard from JAMMA ?), but tracking the four wires back to their sources (presumably on a 56-pin harness) should reveal the answers that you are looking for.

http://www.hardwarebook.info/Electrocoin
Broken:

more pics


http://boxstr.com/view/4799574_5mo0u


http://boxstr.com/view/4799574_5mo0u


http://boxstr.com/view/4799573_2fmao


http://boxstr.com/view/4799898_mmepw


http://boxstr.com/view/4799899_wod53


http://boxstr.com/view/4799901_52lyq


http://boxstr.com/view/4799908_sgvx1
Navigation
Message Index

Go to full version