Main > Main Forum

How do I wire a power switch? *New question* help me find a switch

Pages: << < (3/4) > >>

harry:

Can you provide a link for the spec sheet? Thanks.



ivwshane:

It's here:
http://www.switchchannel.com/switches/rocker%20switches/mr21/Rocker_MR21.pdf

But I think I have it figured out! Your information gave me the little piece of info I was missing.

harry:

Very good.  :)

ivwshane:

So I have been happy with my setup for the most part except for one thing. After I turn on my cab and then turn it off through windows I then need to press the switch in the off position before I can turn it on again.

I would like to install a momentary rocker switch instead which would then allow me to only have to turn the cab on.

Can anyone help me find a switch that will do that and allow me to drop it into place with the one I currently have? I've searched for it on google but I don't know enough to know what exact switch will work/replace my existing setup.

Thanks.

Vicious Burger:


--- Quote from: ivwshane on June 08, 2009, 07:27:19 pm ---So I have been happy with my setup for the most part except for one thing. After I turn on my cab and then turn it off through windows I then need to press the switch in the off position before I can turn it on again.

I would like to install a momentary rocker switch instead which would then allow me to only have to turn the cab on.

Can anyone help me find a switch that will do that and allow me to drop it into place with the one I currently have? I've searched for it on google but I don't know enough to know what exact switch will work/replace my existing setup.

Thanks.

--- End quote ---

This should work for you. I'm going to install a button/switch to turn on my PC in the cabinet without opening it. I did a test yesterday,rerouted the wires from the front of the PC > motherboard and hooked them up to a spare arcade button/microswitch and it works. I just need to install it on the back of my control panel. I assume this would work for your need also.

Pages: << < (3/4) > >>

Go to full version