| Main > Main Forum |
| Are "Nintendo buttons" just long Wico Leafswitch buttons? |
| (1/5) > >> |
| javeryh:
I'm specifically asking about Donkey Kong, I guess, since that is what I'll be restoring. Lizardlick is selling Wico NOS Long Leafswitch Pushbuttons for $2.00 each and I'm wondering if these are the exact same ones used in a Donkey Kong cab. I am pretty sure the regular Happs buttons are 1/16" too big for the CP holes. MikesArcade sells a "Donkey Kong" set but for $15. I'd love to get them new for $6.75 (including the Pal Nut) though. Thanks! |
| mrclean:
different get them from mikesarcade.com you can get them ea. button is 5 bucks or buy the set... http://www.mikesarcade.com/cgi-bin/store.pl?sku=PBSET-TKG |
| javeryh:
Really? They look so similar: Mike's: Lizardlick (long): Lizardlick (short): |
| CheffoJeffo:
You can see the difference in the pics you posted if you look at the "body" of the button (e.g. the part that goes through the hole). Here is a lousy pic of two buttons from my Big Box o' Buttons with a spacer ring from a VS control panel. The Wico has a bigger body (the Nintendo button is just a hair narrower than a standard Happ button). |
| javeryh:
Thanks for the info! I guess I'll be ordering from Mike's. I should probably go all out and get the BUTTON HOLDERS and MICROSWITCHES too, right? $41.25 +tax and shipping for three buttons, the holders and the switches seems pricey to me but I want to do this right... |
| Navigation |
| Message Index |
| Next page |