| Main > Main Forum |
| Anyone used a XXXX-1 Jamma Board before?? |
| (1/3) > >> |
| Matsurigatzu:
I have the XXXX-1 connected and it comes up on screen and its running fine but my controls are not coming on. I cannot even move my joysticks or buttons. Its like they are just off. Any help?? |
| FrizzleFried:
You have a ground issue. The only reason why all controls won't work (aside from a major issue on the PCB) is a ground issue. I'd bet a $20.00 that's the problem. Check the ground wire for your buttons. |
| Matsurigatzu:
I did plug the Motherboard back into the neo geo and the controls work fine. Unplugged it,put it into the Jamma,controls are off. Still a ground issue you think? |
| Kevin Mullins:
I just finished helping a fella figure the same problem out..... his issue was a ground problem. But you may also want to check any dipswitch settings on the multi board itself which tell the multi board what style cabinet/controls you have. Like "Upright/1 Controls" or something like that. (match it to your setup) |
| Matsurigatzu:
where do i find the switches on the jamma board? |
| Navigation |
| Message Index |
| Next page |