| Main > Main Forum |
| Removing laminate... |
| (1/2) > >> |
| Lucky S.O.B.:
I have a dynamo cabinet that has the Red and Grey laminate that is chipped/Dirty and in general falling apart. My question to everyone is: How difficult would it be to remove the laminate? Is there any tricks to do this? Or should I just laminate over the old stuff? -D |
| Brax:
Get a putty knife under it and it will come up surprisingly easy. If you need some help, apply heat from a hairdryer. Remove the glue gunk from the MDF before you reapply your laminate. |
| SNAAAKE:
chisel+hammer works too ! :P |
| rampy:
I used a putty knife and a hammer (i've got pics / description in my Diary of a Madman on my site) and elbow grease. A heat gun or a hair dryer woulda worked/helped... There are probably solvents that you could use to loosen up the glue, but I wouldn't recommend that approach. Rampy |
| AlanS17:
paint scraper/hammer worked for me. if it's loose to begin with you can reach under it and start pealing it up. |
| Navigation |
| Message Index |
| Next page |