Main > Main Forum
U-Trak Noise
Visitor Q:
sigh... I did not install it in the CP so I am not 100% sure how to remove it.
Really sucks that I have to do all this work to something I had someone else build for me. :(
I guess thats the breaks sometime.
I will have to look at the bottom of the CP but with that lip there, I wonder how it is to take it out?
Ginsu Victim:
There should be holes on the bottom of the trackball unit. Use a phillips head screwdriver in those holes to remove the screws.
You need to learn what you have in your CP and how to work on it. Someone else built it, but you're responsible for it.
Hoopz:
--- Quote from: Ginsu Victim on January 22, 2009, 10:20:54 am ---You need to learn what you have in your CP and how to work on it. Someone else built it, but you're responsible for it.
--- End quote ---
QFT
Visitor Q:
--- Quote from: Ginsu Victim on January 22, 2009, 10:20:54 am ---There should be holes on the bottom of the trackball unit. Use a phillips head screwdriver in those holes to remove the screws.
You need to learn what you have in your CP and how to work on it. Someone else built it, but you're responsible for it.
--- End quote ---
Trust me I am not stranger to the inside of it, I don't even bother screwing the bottom on anymore at this point and time.
Since I've had it I have or have been dealing with the following.
Loose Connections
Possible Bad RGB Board Problem
U360 Issues
...and now this U-Trak issue.
I am not pointing the figure and I am surely not saying no one is not helping me take care of these issues because so far everyone involved has been great but...
Look... I am not trying to be a little ---smurfette--- here or anything but it's a bit much for something that is suppose to be 100% brand new. Yeah I know, ---steaming pile of meadow muffin--- happens...
Anyway… So I can unscrew this from the bottom to remove it from the control panel or to get to the parts I need to lubricate? You’ll have to excuses me as I am at work right now and this is not so clear because I don’t have it in front of me. Figured I would gather all the info. I need now and then deal with it when I get home tonight. So… The more I know going into it the better.
Ginsu Victim:
What I said wasn't an attack or anything. It was just a response to:
--- Quote ---Really sucks that I have to do all this work to something I had someone else build for me.
--- End quote ---
I understand your frustration. You spent money on what you hoped to be a perfect setup, and now all these problems are popping up. Good thing you bought yours with products from a reputable vendor like Ultimarc. Andy takes great care of his customer base.