Main > Main Forum

Monitor Glass Thickness

Pages: << < (2/3) > >>

shardian:

Split the difference and go 3/16".

Ginsu Victim:


--- Quote from: shardian on January 14, 2009, 11:20:47 am ---Split the difference and go 3/16".

--- End quote ---

You just gotta be different, huh?

Visitor Q:


--- Quote from: shardian on January 14, 2009, 11:20:47 am ---Split the difference and go 3/16".

--- End quote ---

hahaha

It's like you read my mind Shardian!

I been reading some back posts here and it seems like 3/16" and 1/4" come up the most.

ps. On a side not I see pinball machine glass is 3/16". That is a very big piece of glass, you know people are going to be leaning on that at some point and time.

CheffoJeffo:

3/16" tempered glass will do it -- just be careful with the edges (e.g. don't set it down roughly on edge on a concrete floor).

HaRuMaN:


--- Quote from: CheffoJeffo on January 14, 2009, 12:18:17 pm ---3/16" tempered glass will do it -- just be careful with the edges (e.g. don't set it down roughly on edge on a concrete floor).

--- End quote ---

Someone did that with a pinball playfield glass at the Superauctions I went to...

*boom!*

Pages: << < (2/3) > >>

Go to full version