| Main > Main Forum |
| Monitor Glass Thickness |
| << < (2/3) > >> |
| shardian:
Split the difference and go 3/16". |
| Ginsu Victim:
--- Quote from: shardian on January 14, 2009, 11:20:47 am ---Split the difference and go 3/16". --- End quote --- You just gotta be different, huh? |
| Visitor Q:
--- Quote from: shardian on January 14, 2009, 11:20:47 am ---Split the difference and go 3/16". --- End quote --- hahaha It's like you read my mind Shardian! I been reading some back posts here and it seems like 3/16" and 1/4" come up the most. ps. On a side not I see pinball machine glass is 3/16". That is a very big piece of glass, you know people are going to be leaning on that at some point and time. |
| CheffoJeffo:
3/16" tempered glass will do it -- just be careful with the edges (e.g. don't set it down roughly on edge on a concrete floor). |
| HaRuMaN:
--- Quote from: CheffoJeffo on January 14, 2009, 12:18:17 pm ---3/16" tempered glass will do it -- just be careful with the edges (e.g. don't set it down roughly on edge on a concrete floor). --- End quote --- Someone did that with a pinball playfield glass at the Superauctions I went to... *boom!* |
| Navigation |
| Message Index |
| Next page |
| Previous page |