| Main > Main Forum |
| Glass Retainers |
| << < (5/6) > >> |
| Visitor Q:
--- Quote from: polaris on January 14, 2009, 02:49:24 pm ---i reckon it'd work perfectly then, sorry got no pics of the tank i made --- End quote --- Well I surely will consider it. |
| Bender:
how about marquee retainer like 3/4" angle iron painted black? |
| ivwshane:
I used angled aluminum painted black and screwed it in from the bottom on to my monitor bezel (mdf) and stuck some splice tape between the aluminum and glass. http://www.homedepot.ca/webapp/wcs/stores/servlet/CatalogSearchResultView?D=904262&Ntt=904262&catalogId=11601&storeId=10051&langId=-15&Dx=mode+matchallpartial&Ntx=mode+matchall&recN=51%204294964299%2016&N=0&Ntk=P_PartNumber&revtab=true I'll take some pics if you need it. |
| Visitor Q:
--- Quote from: RayB on January 14, 2009, 02:01:39 pm ---None of the hundreds of arcade machines I have ever seen have ever had holes drilled in the glass to secure them, and that's probably for good reason. --- End quote --- Let me answer this one again... CO$T! It is $100, yup $100 + dollars to have holes drilled in the glass!!!! :dizzy: |
| Visitor Q:
--- Quote from: ivwshane on January 14, 2009, 06:04:42 pm ---I used angled aluminum painted black and screwed it in from the bottom on to my monitor bezel (mdf) and stuck some splice tape between the aluminum and glass. http://www.homedepot.ca/webapp/wcs/stores/servlet/CatalogSearchResultView?D=904262&Ntt=904262&catalogId=11601&storeId=10051&langId=-15&Dx=mode+matchallpartial&Ntx=mode+matchall&recN=51%204294964299%2016&N=0&Ntk=P_PartNumber&revtab=true I'll take some pics if you need it. --- End quote --- Pix would be cool, thanks. ps. I owned two Corrados. A Yellow G60 and I turbo charged a VR6 (Plum). :cheers: |
| Navigation |
| Message Index |
| Next page |
| Previous page |