Main > Main Forum
Happ Transluscent vs. Regular Pushbutton tacktile feel
<< < (4/4)
Ginsu Victim:

--- Quote from: RandyT on January 13, 2009, 02:26:18 pm ---This method also works on the HAPP translucents / NovaGem Buttons. ;)

--- End quote ---

This is the response I was waiting for. ;D
RandyT:

--- Quote from: Ginsu Victim on January 13, 2009, 02:40:26 pm ---
--- Quote from: RandyT on January 13, 2009, 02:26:18 pm ---This method also works on the HAPP translucents / NovaGem Buttons. ;)

--- End quote ---

This is the response I was waiting for. ;D

--- End quote ---

Wasn't it obvious?

The difference is in the "Nova" lighting assembly.  You would need to pack 5 regular superbrights into a HAPP translucent to get the same light intensity. ;)

RandyT
Ginsu Victim:

--- Quote from: RandyT on January 13, 2009, 02:45:03 pm ---
--- Quote from: Ginsu Victim on January 13, 2009, 02:40:26 pm ---
--- Quote from: RandyT on January 13, 2009, 02:26:18 pm ---This method also works on the HAPP translucents / NovaGem Buttons. ;)

--- End quote ---

This is the response I was waiting for. ;D

--- End quote ---

Wasn't it obvious?
--- End quote ---

Well, yeah. I just wanted to hear it from you rather than having people speculate.
Cornchip:
  Wish I had my camera handy. The GGG EI buttons will vibrate on a button smack. The spring is free to touch the inside wall of the plunger causing that buzzy twang sound. I settled with two pieces of fiber packing tape (what I had on hand other than electrical or masking tape) around both legs of the plunger at the mid point. This keeps the spring away from the surface of the plunger. This gave the button a more solid feel. Something to try.

 Cornchip
csa3d:

--- Quote from: Cornchip on January 13, 2009, 09:40:23 pm ---  Wish I had my camera handy. The GGG EI buttons will vibrate on a button smack. The spring is free to touch the inside wall of the plunger causing that buzzy twang sound. I settled with two pieces of fiber packing tape (what I had on hand other than electrical or masking tape) around both legs of the plunger at the mid point. This keeps the spring away from the surface of the plunger. This gave the button a more solid feel. Something to try.

 Cornchip

--- End quote ---

Yeah, I can't wrap my head around what that exactly means.  If you get a chance, snapping a shot would be super groovy  :afro: !

-csa
Navigation
Message Index
Previous page

Go to full version