Main > Everything Else
Nightmare "upgrade"
SavannahLion:
For the most part, upgrades are pretty rare for me. Long ago I stopped pumping money into piecemeal upgrades with my PC's. Oh sure, the occasional RAM or HDD upgrade happens or the occasional GPU upgrade when a game calls for it. Or, more often, I'll upgrade some component when the original fails. For me, I build the PC in its entirety and all the components are effectively "married" together for the life of the machine. Once its useful life ends, I'll scavenge the PC for parts to keep my other older PCs operating.
So bring in my mother with her 7+ year old IBM. It's running dog slower than usual. So I drop in my usual Bart recover and scan disc and... nothing. WTF? OK, drop in Knoppix and... I get punted into the command line... Huh?
Alright, OK whatever. Took me about forty minutes before I realized the PC was running 32MB of RAM. Holy ---Cleveland steamer---. So I pull out some random compatible board (P5A or the BH6 I forget) yank the measly 128MB sticks in there and toss them in the IBM. As I'm pulling the IBM RAM out, I pop one of the numerous ill placed capacitors. I don't just bend it over, one of the legs actually pops right out. Oh ---Cleveland steamer--- on a stick. So I fire up my soldering iron, pull the entire board out to take a look and... lo and behold, it's got Badcaps. Well ---fudgesicle--- a duck, no wonder it's running like ---Cleveland steamer---.
I was presented with a dilemma. Try and repair an aging board with about $5 worth of caps or go the upgrade route. I took the upgrade. Bumping a MicroATX (It looks more like a Mini ATX but whatever) board from an 800Mhz CPU to the newer dual core jobs.
$124 later I walk out of the store with a new MicroATX board, E2200, and a stick of RAM. More than enough to meet her browsing, email, and Grim Fandango fix. Toss in another Franklin and I can replace that crap ME install with XP. Made sure I lined up the mounting holes and jack position with the demo board on display. It'll fit in the case. :)
Go home and start pulling parts out of the case. Oops, the old PC has a 150 Watt 20 pin connector. Guess it's back to the store for a new power supply. The IBM supply looks like an MicroATX so that's what I buy. The store really only had two types anyways (four if you count their eMachine and AT supplies ??? ) Drive back home. Pop the old supply out and... ---fudgesicle---.... I knew this wasn't going to be easy. The old PSU "looks" like a MicroATX but it's slightly larger and the screw positions are more like a full ATX. In fact, it's like they took all the measurements of a full blown ATX and scaled them down about 15%, right down to the positions of the screw holes. No way any other power supply was going to work without some serious case hacking nor was I going to get an IBM OEM replacement, the largest was 188 watts and none have the 20+4 connectors I needed. And they cost too damn much for such old hardware. ---fudgesicle--- that. :banghead:
So here I am, trying to explain to my mother that with over half the parts swapped out, I might as well go for broke and build an all new PC. She's balking at replacing the capacitors but also at building from the ground up. Not much that I can do. :dunno
I really hate returning hardware, but it looks like I'll be making trip number 3 for those returns. :badmood:
Malenko:
I had a similar problem, I went to replace a power supply and bought one that was supposed to fit. the connectors were right but the screw holes were like 1/2 inch off, I just drilled new holes in the PC case and it worked just fine.
sounds like you should have just built a new one from the ground up from the start. good news is you'd have a buncha old parts to add to your collection.
DaOld Man:
--- Quote from: Malenko on January 12, 2009, 06:42:54 pm ---
sounds like you should have just built a new one from the ground up from the start. good news is you'd have a buncha old parts to add to your collection.
--- End quote ---
I have a whole closet full of parts that have been in my collection since the 90's. I wonder if it is really worth even saving computer parts when you do an upgrade.
Malenko:
got a "good" PCI video card? lol I pieced together a PC for my mame cab but all I have is PCI-e and AGP vid cards; but the PC was "free"
DaOld Man:
I probably do, but I cant guarantee how good it is.
Let me take a look, if you really want it, I will give it to you.
Most likely dont have the drivers though.
Navigation
[0] Message Index
[#] Next page
Go to full version