Main > Main Forum
rf topgun behind plexiglas , will this work?
Martijn:
if i would buy a rf topgun would it work with plexi ?
3mm thick plexi that is.
and i would remove the leds and drill holes in the tv bezel on the same spots and place the leds in there.
and with 25 inch tv , how far do i need to stand
quote from the manual :
Note : 1. The distance between the TopGun and the screen should be 2-3 times of the distance between the two LED
stands. (for LED stands mounted beside the screen)
what do you guys think
zelony:
I have my Topgun LED's behind slightly tinted glass. It works fine. As long as your LED's are visible, you should not have a problem.
Just test out the spacing before you mount them permanently.
I might add, you should consider wiring in a switch to be able to turn off the LED's so that they last longer. It is not hard to do and will greatly extend the life of the LED's.
Good luck.
Jeff
Martijn:
and is it fun :)?
zelony:
Yes. I mostly play area51 but it is fun. That being said, I am planning on converting a shooting cab to a dedicated shooter based on a PS2. Better game selection and easier to use.
nailsn:
I'm using the ems topgun II behind tinted glass. Everything is fine, but maybe its a little tough to get the gun working for nonmame games. PC Games like House Of The Dead 3 and Virtua Cop 2 are the most played lightgun games on my cap.
I'm still excited about the upcoming release of elsemis sega model 2 emulator, which will feature dual mouse/lightguns support for the original House of the Dead and Virtua Cop 1 and 2.
That's gonna ROCK! :cheers: