Main > Project Announcements

Plans For Upright MAME Cabinet With Sketchup Pics

<< < (2/3) > >>

IG-88:
Looks pretty good. I say keep the fan up top. I would remove the monitor case too if it were mine.

By the way where did you get the various pics for your sketchup plan? You draw them yourself?

leapinlew:
I would ditch the Vornado and put a couple exhaust ports at the top. You could put two 120MM fans in the bottom of the cabinet and it could push air into the cabinet from the bottom. This would allow the heat to rise out the holes and pull in cooler air from the bottom of the room.

I wouldn't put the back door on a hinge that swings open. What could happen is you need to get in behind it, but not enough to pull the thing 4 feet away from the wall so you can swing the door open. I would consider a lip on the bottom of the door to hold the door on and secure the top with panel clamps.

Good luck!

Martijn:
whole cab is nice, except the size of the monitor, to small for such a solid construction

i would use a TV or buy that arcade monitor

like they say , don't go below 25 inch :P

and i would close up the marquee light as it would bleed through the fan back and maybe monitor and speaker

dkssprs:
very nice and classic design!!!!Many gratz to you mate  :applaud:
I agree using a larger monitor.
GOD i must learn how to use sketch up

Gatsu:
looks really good man. I agree though about those support beams...you don't need them.

sketchup is relatively easy to use. Its glitchy as hell though on my machine...cant speak for everyone else. But its the fastest I've picked up and learned a 3d modelling program.

Navigation

[0] Message Index

[#] Next page

[*] Previous page