Main > Project Announcements

XBOX 360 Street Fighter Stick #2

<< < (4/12) > >>

dmworking247:
I can't tell from your first post whether the back & front walls have an angled cut on them?

I can see an angle on the side walls so that the CP surface angles towards the player (excellent!) but I was wondering if you had to angle cut the top edges of the back/front walls, and whether that added a lot of complexity?

somunny:

--- Quote from: dmworking247 on January 13, 2009, 07:04:53 pm ---I can't tell from your first post whether the back & front walls have an angled cut on them?

I can see an angle on the side walls so that the CP surface angles towards the player (excellent!) but I was wondering if you had to angle cut the top edges of the back/front walls, and whether that added a lot of complexity?

--- End quote ---

Yes the fron and back pieces are cut to match the angle of the side pieces.  If you have a table saw it's pretty simple to cut the angle.  I used the side piece as a guide to set the blade.  Just butt it up to the blade and adjust. 



The height of the box is only 4 1/8" at it's tallest point.  Haven't played with it on my lap, though.  I normally set my other stick on the coffee table and play it that way.  My other stick is quite a bit bigger than the red Street Fighter one however.

massive88:

--- Quote from: Namco on January 13, 2009, 03:41:58 pm ---When I have more time, I'll search for your project thread to see the images of the underside/insides. If you don't have one, please post one up. Thanks a bunch!!

--- End quote ---

Dunno if this was for me or not.  But I detailed my build here which includes some shots of the inside.

Mine are all 2 1/8" tall overall, I think you could make it as small as 1 3/4" with the Japanese parts, but I wanted some extra room for my first builds.  Also the wiring on the Texas stick is a nightmare, I did much better by the third one (the b/w/r one).

somunny:
A little more progress tonight.  Tomorrow, I'm going to try and route out the Lexan and drill the holes in the top deck.





Gatsu:
Looking really good man. Any idea on the artwork? or are you saving that for the big finale?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version