Main > Main Forum

Mounting a PC, causing as little stress to the VGA card as poss.

Pages: (1/3) > >>

payment_due:



Ive built my MAMEpc and it's in pieces, and it will not have a case.  I originally wanted to mount the PC on a small piece of plywood, but I decided I will mount it in my cab as the cab has some wood for mounting PCBs in it already. Mounting the mobo/pcb is not an issue. I got some PCB feeties and those will work just dandy. But my question is regarding the placement of the board to lessen the 'stress' on the vga card.  Since the pcb will not have a case, there's not really a way (that I can see) of securing the VGA card.  Anyone have any suggestions on how to secure it?

Here's a pic of the pc (sans all the cabling)





Games001:

Using a bit of scrap wood, set a bar of wood, the right length and 'width/height' in order to allow you to screw the top notch of the VGA card right into the wood.  It will be dead secure that way and also removes any chance of metal grounding issues.  Just make sure you cut the mounting bord into a 'upside down U' shape in order to allow the cables to reach the ports.

CathalDublin:

Good idea games001
I just securied my vga cable so it couldnt pull the card out and havent had any issues

vetteguy112233:

I like the look of the bare pc hardware mounted inside of the cabinet, but I figured in the long run it would be easier for me to leave it all in the tower and just secure the tower inside the cabinet.

That way if I ever have a problem with hardware or need to move the machine, I can just take the tower out.

But the piece of wood idea that is the same height as the video card seems to work very well. I've seen it like that in other cabinets.

payment_due:

Thanks for the suggestions fellas.  But how would I go about securing the piece of wood? I don't want to glue it into the wood on the cab, I'd like for it to be removable.

Pages: (1/3) > >>

Go to full version